Brother MFC-3420C - Manual (Page 87)

6 - 7 SETUP SEND
Fax Resolution
You can use the Fax Resolution key to change the setting
temporarily (for this fax only). Press Fax Resolution and or
to select the setting you want, and then press Menu/Set .
—OR—
You can change the default setting:
1
If it is not illuminated in green, press ( Fax ).
2
Load your original. (See Load originals on page 2-1.)
3
Press Menu/Set , 2 , 2 , 2 .
4
Press or to select the
resolution you want.
Press Menu/Set .
5
Press Stop/Exit .
Standard Suitable for most typed originals.
Fine Good for small print and transmits a little
slower than Standard resolution.
S. Fine Good for small print or artwork and transmits
slower than Fine resolution.
Photo Use when the original has varying shades of
gray. This has the slowest transmission
time.
2.Fax Resolution