Brother MFC-3420C - Manual (Page 65)

4 - 7 GETTING STARTED
Setting the Ring Volume
You can adjust the ring volume when your MFC is idle (not being
used). You can turn the ring
Off or you can select the ring volume
level.
1
Press Menu/Set , 1 , 4 , 1 .
2
Press or to select
( Low , Med , High or Off ).
Press Menu/Set .
3
Press Stop/Exit .
—OR—
In Fax mode, press or to adjust the volume level. Every time
you press these keys, the MFC will ring so you can hear the active
setting as the LCD shows it. The volume changes with each key
press. The new setting will stay until you change it again.
Setting the Beeper Volume
You can change the beeper volume. The default (factory) setting is
Low . When the beeper is on, the MFC beeps every time you press a
key or make a mistake and after a fax is sent or received.
1
Press Menu/Set , 1 , 4 , 2 .
2
Press or to select your
option.
(
Low , Med , High or Off )
Press Menu/Set .
3
Press Stop/Exit .
1.Ring
2.Beeper