Brother MFC-J270W - Manual (Page 88)

74
Machine Information
B
Checking the serial number
B
You can see the machine’s serial number on
the LCD.
a
Press Menu.
b
Press a or b to choose
Machine Info.
Press OK.
c
Press a or b to choose Serial No.
Press OK.
d
Press Stop/Exit.
Reset functions
B
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 Speed Dial&Fax
Speed Dial & Fax resets the following
settings:
 Speed Dial
(Speed-Dial and Setup Groups)
 Station ID
(Name and Number)
 Report settings
(Transmission Verification Report,
Quick Dial List and Fax Journal)
 History
(Caller ID history and Outgoing Call)
 Faxes in memory
3 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you use this
operation when you dispose of the
machine.
How to reset the machine
B
a
Press Menu.
b
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose Reset.
Press OK.
d
Press a or b to choose the type of reset
you want to use.
Press OK.
Press 1 to confirm.
e
Press 1 to reboot the machine.