Brother MFC-J270W - Manual (Page 29)

Loading paper
15
2
Paper settings
2
Paper Type
2
To get the best print quality, set the machine
for the type of paper you are using.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Paper Type.
Press OK.
d
Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61, Other Glossy or
Transparency.
Press OK.
e
Press Stop/Exit.
Note
The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Paper Size
2
You can use six sizes of paper for copies:
Letter, Legal, A4, A5, Executive and
4"
 6" (10  15 cm) and three sizes for
printing faxes: Letter, Legal and A4. When
you change the size of paper you load in the
machine, you will need to change the paper
size setting at the same time so your machine
can fit an incoming fax on the page.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Paper Size.
Press OK.
d
Press a or b to choose Letter, Legal,
A4, A5, EXE and 4"x 6".
Press OK.
e
Press Stop/Exit.