Brother MFC-J270W - Manual (Page 55)

41
8
8
How to copy
8
The following steps show the basic copy
operation. For details about each option, see
the Advanced User’s Guide.
a
When you want to make a copy, press
(COPY) to illuminate it in blue.
 Make sure you are in copy mode.
 The LCD shows:
1 No. of Copies
You can enter the number of copies you
want by using the dial pad.
Note
The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer in
chapter 1 in the Advanced User’s Guide.)
b
Do one of the following to load your
document:
 Place the document face down in the
ADF.
(See Using the ADF (MFC-J415W
only) on page 20.)
 Load your document face down on
the scanner glass.
(See Using the scanner glass
on page 20.)
c
If you want more than one copy, enter
the number (up to 99).
d
Press Black Start or Color Start.
Stop copying
8
To stop copying, press Stop/Exit.
Making copies
8
01 01 1
Press Start
Normal
Quality
Enlarge/Reduce
Paper Type