Brother MFC-J270W - Manual (Page 70)

56
Ink Absorber Full The ink absorber box or flushing
box is full. These components are
periodic maintenance items that
may require replacement after a
period of time to ensure optimum
performance from your Brother
machine. The need to replace
these items and the time period
before replacement is dependent
on the number of purges and
flushes required to clean the ink
system. These boxes acquire
amounts of ink during the different
purging and flushing operations.
The number of times a machine
purges and flushes for cleaning
varies depending on different
situations. For example,
frequently powering the machine
on and off will cause numerous
cleaning cycles since the machine
automatically cleans upon power
up. The use of non-Brother ink
may cause frequent cleanings
because non-Brother ink could
cause poor print quality which is
resolved by cleaning. The more
cleaning the machine requires the
faster these boxes will fill up.
Note
Repairs resulting from the use
of non-Brother supplies may
not be covered under the
stated product warranty.
The ink absorber box or flushing box will
need to be replaced. Contact Brother
Customer Service or a Brother Authorized
Service Center to have your machine
serviced. (See Brother numbers
on page i.)
Other reasons for cleaning are:
1 Machine automatically cleans after
clearing a printer jam.
2 Machine automatically cleans after
sitting idle for more than 45 days
(infrequent use).
Ink Absorber NearFull The ink absorber box or flushing
box is nearly full. The ink absorber box or flushing box will
need to be replaced. Call Brother
Customer Service or a Brother Authorized
Service Center to have your machine
serviced. (See Brother numbers
on page i.)
Error Message Cause Action