Brother MFC-J270W - Manual (Page 85)

Troubleshooting
71
B
PhotoCapture Center
®
Difficulties
Difficulty Suggestions
Removable Disk does not work
properly.
1 Have you installed the Windows ® 2000 update? If not, do the following:
1) Unplug the USB cable.
2) Install the Windows ® 2000 update using one of the following methods.
 Install MFL-Pro Suite from the Installation CD-ROM. (See the Quick
Setup Guide.)
 Download the latest service pack from the Microsoft Web site.
3) Wait about 1 minute after you restart the PC, and then connect the USB
cable.
2 Take out the memory card and put it back in again.
3 If you have tried “Eject” from within Windows ® , take out the memory card
before you continue.
4 If an error message appears when you try to eject the memory card, it means
the card is being accessed. Wait a while and then try again.
5 If all of the above do not work, turn off your PC and machine, and then turn
them on again. (You will have to unplug the power cord of the machine to turn
it off.)
Cannot access Removable Disk
from Desktop icon. Make sure that you have correctly inserted the memory card.
Part of my photo is missing when
printed. Make sure that Borderless printing and Cropping are turned off. (See Borderless
printing and Cropping in chapter 8 in the Advanced User’s Guide.)