Brother MFC-J285DW - Manual (Page 81)

Troubleshooting
67
B
Data Remaining Print data is left in the machine's
memory.
Press . The machine will cancel
the job and clear it from the memory.
Try to print again.
Disconnected The other person or other person's
fax machine stopped the call. Try to send or receive again.
If calls are stopped repeatedly and
you are using a VoIP (Voice over IP)
system, try changing the
Compatibility to Basic (for VoIP). (See
Telephone line interference / VoIP
on page 92.)
DR Mode in Use The machine is in Distinctive Ring
mode. You cannot change the
Receive Mode when Distinctive Ring
is on. Set Distinctive Ring to Off. (See
Turning off Distinctive Ring
on page 35.)
High Temperature The room temperature is too high. After cooling the room, allow the
machine to cool down to room
temperature. Try again later.
Error Message Cause Action