Brother MFC-J285DW - Manual (Page 40)

Chapter 4
26
f
When the Touchscreen asks you
Next Page?, do one of the following:
 To send a single page, press
No (Send).
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
Stop faxing
4
To stop faxing, press .
Setting scanner glass size for
faxing
4
When documents are A4 size, you need to
set the Scan Size to A4. If you do not, the
bottom portion of the faxes will be missing.
a
Load your document.
b
Press (Fax).
c
Press Options.
d
Press s or t on the Touchpanel to
display Glass Scan Size.
e
Press Glass Scan Size.
f
Press A4 (or Letter).
g
Press OK.
h
Enter the fax number.
i
Press Fax Start.
NOTE
You can save the setting you use most
often by setting it as the default setting.
(See Advanced User’s Guide: Setting
your changes as the new default.)
Color fax transmission
4
Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine’s
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
a
Load your document.
b
Press (Fax).
c
Press Options.
d
Press s or t on the Touchpanel to
display Color Setting.
e
Press Color Setting.
f
Press Color.
g
Press OK.
h
Enter the fax number.
i
Press Fax Start.
j
Read the information on the
Touchscreen, and then press
Color Fax.
Canceling a fax in progress
4
If you want to cancel a fax while the machine
is scanning, dialing or sending, press
.