Brother MFC-J285DW - Manual (Page 116)

102
(Settings) (continued)
C
Network
(Continued)
WLAN Enable — — On
Off*
Lets you use the
wireless network
connection. See .
Network Reset — — Yes
No
Restore all
network settings
back to the
factory settings.
Level1 Level2 Level3 Options Descriptions Page
Print Reports Transmission — — Prints these lists and
reports. See .
Address Book — Alphabetical
Order
Numerical Order
Fax Journal — —
User Settings — —
Network Config — —
WLAN Report — —
Caller ID hist. — —
Machine Info. Serial No. — — Lets you check the serial
number of your machine. 93
Version — — Lets you check the
firmware version of your
machine. 93
Initial Setup Date & Time Date & Time — Puts the date and time on
the Touchscreen and in
the headings of the faxes
you send. 62
Auto Daylight On
Off*
Change this setting to On
if you want the machine to
change automatically for
Daylight Saving Time. See .
Station ID — Fax:
Name:
Enter your name and fax
number to appear on
each page you fax. See .
Tone/Pulse
(Canada only)
— Tone*
Pulse
Choose the dialing mode.
See Advanced User’s Guide.
See Quick Setup Guide.
The factory settings are shown in Bold with an asterisk.
Level1 Level2 Level3 Level4 Options Descriptions Page
See Software and Network User’s Guide.
Go to the Brother Solutions Center to download Web Connect Guide at http://solutions.brother.com/.
The factory settings are shown in Bold with an asterisk.