Brother PT-E550W - Manual (Page 19)

Configuring your machine for a wireless network
14
5
Using your Brother machine’s own functions
5
You can select the network type, configure or display the network settings, and so on, using the Menu key.
Selecting the Network Type
5
1
Press the Menu key, select “WLAN” using the a or b key and then press the OK or Enter key.
2
Select “Network Mode” using the a or b key and then press the OK or Enter key.
3
Select the network type to be used using the a or b key and then press the OK or Enter key.
“Off”: Wireless network OFF
“Direct Mode”: Connect using Wireless Direct
“Infrastructure Mode”: Connect using WLAN
The screen then returns to the text entry screen.
4
If some messages are displayed, press the OK or Enter for each message.
Displaying the Network Settings
5
1
Press the Menu key, select “WLAN” using the a or b key and then press the OK or Enter key.
2
Select “Network Status” using the a or b key and then press the OK or Enter key.
3
Select “Infrastructure Mode” using the a or b key and then press the OK or Enter key.
The current Infrastructure Mode settings are displayed.
NOTE
When using the Direct Mode, select “Direct Mode”.
4
The screen returns to the text entry screen when you press the OK or Enter key.