Brother DCP-585CW - Manual (Page 39)

Making copies
27
4
You can change the copy settings temporarily
for the next copy.
These settings are temporary, and the
machine returns to its default settings
1 minute after copying.
If you have finished choosing settings, press
Black Start or Color Start.
If you want to choose more settings, press a
or b.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
changes as the new default on page 32.)
Changing copy quality
4
You can choose the copy quality. The factory
setting is Normal.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose Quality.
d
Press d or c to choose Fast, Normal or
Best.
Press OK.
e
If you do not want to change additional
settings, press Black Start or
Color Start.
Enlarging or reducing the
image copied
4
You can choose an enlargement or reduction
ratio.If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose
Enlarge/Reduce.
d
Press d or c to choose Enlarge,
Reduce, Fit to Page,
Custom(25-400%), or 100%.
Press OK.
e
Do one of the following.
„ If you choose Enlarge or Reduce
press OK and press d or c to choose
the enlargement or reduction ratio
you want. Press OK and go to
step f.
„ If you choose Custom(25-400%),
press OK. Press + or - to enter an
enlargement or reduction ratio from
25% to 400%. Press OK and go to
step f.
„ If you choose 100% or
Fit to Page, press OK. Go to
step f.
Fast Fast copy speed and lowest
amount of ink used. Use this
setting to save time (documents to
be proof read, large documents or
many copies).
Normal Recommended setting for ordinary
printouts. Good copy quality with
adequate copy speed.
Best Use this setting to copy precise
images such as photographs. The
highest resolution and slowest
speed.
100%
198% 4"x6"iA4
186% 4"x6"iLTR
104% EXEiLTR
97% LTRiA4
93% A4iLTR
83%
78%
46% LTRi4"x6"
Fit to Page
Custom(25-400%)