Brother HL-8050N - Manual (Page 94)

CONTROL PANEL 4 - 14
QUALITY
SETUP
Menu Description
RESOLUTION 300/600/1200 You can select a print resolution of 300, 600
or 1200 dpi (dots per inch).
HRC MEDIUM/DARK/OFF/LIGHT HRC : High Resolution Control (HRC) offers
improved print quality of letters, numbers
and graphics that conventional laser printers
cannot achieve, with a resolution of 300 or
600 dpi.
TONER SAVE OFF/ON Reduce costs by turning this on.
DENSITY -2 to 2 Increase or decrease the print density.
Menu Description
LANGUAGE ENGLISH/FRAN Ç AIS/... Select the language you want the display of
the LCD to show.
PANEL CONTROL LOWER LCD NONE/PAGE
COUNTER/JOB
NAME Select what you want to appear on the
second line of your LCD display.
AUTO ONLINE ON/OFF The printer will automatically go online after
a print job if you set this to ON.
BUTTON REPEAT Set the time for the display message to
change when holding the + or - button at
intervals of: 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 1.5 or
2.0 seconds. The factory setting is 0.1.
MESSAGE SCROLL Set the time in seconds that an LCD
message will scroll across the display. From
Level 1=0.2 to Level 10=2.0. The factory
setting is Level 1.
ERROR BUZZER OFF Select this if you do not want the buzzer to
activate when there is an error at the printer.
NORMAL There will be three sets of five Buzzes when
an error occurs.
SPECIAL Buzzes five times consecutively until the
error is cleared.
PANEL BUZZER OFF Disables buzz function when you press the
button.
ON Enables buzz function when you press the
button.
POWER SAVE TIME 1:30:60MIN. Select the length of time the printer will wait
until it goes into Power Save mode.
AUTO CONTINUE OFF/ON
TONER LOW CONTINUE/STOP CONTINUE : Continue printing even if there is
a TONER LOW error.
STOP
: Stop printing if there is a TONER LOW
error.