Information, Paper, Information -13 paper -13 – Brother HL-8050N User Manual
Page 93: Information paper

4 - 13 CONTROL PANEL
INFORMATION
PAPER
Menu
Description
PRINT SETTINGS
Prints the print settings page.
PRINT TEST
Prints the test page.
PRINT DEMO
Prints the demonstration sheet.
PRINT FILE LIST
Prints the card list.
PRINT FONTS
Prints the font list and samples.
VERSION
SER.NO
#########
Shows Printer serial number.
ROM VER
####
Shows ROM version.
ROM DATE
##/##/##
Shows ROM date.
NET VER
####
Shows Network version (only Network
users).
NET DATE
##/##/##
Shows Network build date (only Network
users).
ENG VER
####
Shows Engine ROM version.
RAM SIZE
###MB
Shows the size of memory in this printer.
MAINTENANCE
PAGE COUNTER
######
Shows the current total printed pages.
REMAIN FUSER
######
Shows the pages left to print with fuser unit.
Menu
Description
SOURCE
AUTO/TRAY1/TRAY2/TRAY3/
TRAY4
Select which paper tray the paper will be fed
from.
PRIORITY
T1>T2>T3>T4
T4>T3>T2>T1
When SOURCE is selected as AUTO:
Selects the order in which the printer uses
the paper trays that contains paper of the
same size.
MANUAL FEED
OFF/ON
Select whether or not you want to feed paper
manually.
TRAY1 SIZE
DETECT SENSOR/B5/B6/A6/
COM-10/DL/MONARCH/C5/
USER DEFINED
Select the size of paper you loaded in the
paper tray, for example, A4/Letter/Legal/....
TRAY2 SIZE
DETECT SENSOR/B5/B6/A6/
COM-10/DL/MONARCH/C5/
USER DEFINED
Select the size of paper you loaded in the
paper tray, for example, A4/Letter/Legal/....
TRAY3 SIZE
DETECT SENSOR/B5/B6/A6/
COM-10/DL/MONARCH/C5/
USER DEFINED
Select the size of paper you loaded in the
paper tray, for example, A4/Letter/Legal/....
TRAY4 SIZE
DETECT SENSOR/B5/B6/A6/
COM-10/DL/MONARCH/C5/
USER DEFINED
Select the size of paper you loaded in the
paper tray, for example, A4/Letter/Legal/....
DUPLEX
OFF/ON (LONG BIND)/
ON (SHORT BIND)
Select whether you want to automatically
print on both sides of the paper.
OUTPUT
STANDARD/CT/CT STACK
Select where you want the printed pages to
go.
JOB OFFSET
ON/OFF
Select whether or not you want to offset the
job.