Brother MFC-255CW - Manual (Page 35)

35
Windows
® Wireless Network
Windows
®
Macinto
sh
Wirele
ss Network
h
For Windows
®
XP SP2 or greater/XP
Professional x64 Edition/Windows Vista ®
users, when this screen appears, choose
Change the Firewall port settings to enable
network connection and continue with the
installation. (Recommended) and click Next.
If you are using a firewall other than Windows ®
Firewall or Windows ® Firewall is off, this screen
may appear.
See the instructions provided with your firewall
software for information on how to add the
following network ports.
„ For network scanning, add UDP port 54925.
„ If you still have trouble with your network
connection, add UDP port 137.
Note
• If there is more than one machine connected to
the network, choose your machine from the list,
and then click Next.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
• If your wireless settings fail, an error message
will appear during the installation of MFL-Pro
Suite and the installation will be terminated.
Confirm your settings by following the
on-screen instructions. If you encounter this
failure, go to step
18-a on page 29 and setup
the wireless connection again.
If you are using antivirus software or a firewall
you should temporarily disable it.
• If you are using WEP and the LCD displayed
Connected but your machine is not found,
make sure you entered the WEP key correctly.
The WEP key is case sensitive.
• If the IP address of the machine is not yet
configured for use on your network, the
following screen appears.
Click OK and then click
Configure IP Address. Enter an IP address
for your machine that is suitable for your
network by following the on-screen
instructions.
To confirm the IP address, print out the
Network Configuration report by pressing
Menu, 6, 6 and Black Start. (For details, see
Printing Reports in Chapter 9 of User’s guide.)