Brother MFC-685CW - Manual (Page 95)

Control panel setup
87
6
f Enter the Node Name.
Press OK.
Note
DCP models cannot change the Node Name from the control panel menu.
g Press Stop/Exit.
WINS Config
6
This selection controls how the machine obtains the IP address of the WINS server.
a Press Menu.
b Press a or b to select LAN.
Press OK.
c (For Wired) Press a or b to select Wired LAN.
(For Wireless) Press a or b to select WLAN.
Press OK.
d
Press a or b to select TCP/IP.
Press OK.
e
Press a or b to select WINS Config.
Press OK.
f
Press d or c to select Auto or Static.
Press OK.
g Press Stop/Exit.
Auto
6
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto or DHCP for this feature to work.
Static
6
Uses a specified IP address for the primary and secondary WINS servers.
WINS Server
6
Primary WINS Server IP Address
6
This field specifies the IP address of the primary WINS (Windows
®
Internet Naming Service) server. If set to
a non-zero value, the machine will contact this server to register its name with the Windows
®
Internet Name
Service.