Brother MFC 8840D - Manual (Page 64)

NOVELL NETWARE PRINTING 6 - 7
3 One or more Print/Fax servers will appear in the list (the default
node names are
BRN_xxxxxx , where xxxxxx is the last six
digits of the Ethernet address (MAC address)).
4 Select the Print/Fax server that you wish to configure and
double click it. You will be asked for a password. The default
password is
access .
5 Select the NetWare tab.
a If it is not already selected, select Queue Server as the
operating mode.
b Click the Change Bindery Queues button.
c Select the NetWare server which you wish to configure.
d Select the New Queue button and type in the queue name
which you wish to create.
e Once you have done that highlight the queue name you
created and click on the Add button.
f Click on Close and then OK.
Now exit the BRAdmin Professional utility. You are ready to print.
You can find the node name and MAC address by printing
out the Network configuration page. For information on how
to print the configuration page on your machine, see
Resetting the Print/Fax Sever back to factory settings (Test
Switch) on page 13-4.
If necessary change the Netware Print Server Name. The
default NetWare Print server name will usually be
BRN_xxxxxx_P1 where xxxxxx is the Ethernet address of
the Print/Fax server. Be careful! Changing the name may
impact the configuration of other protocols because the print
server service names will be altered.