Brother MFC 8840D - Manual (Page 24)

UNIX PRINTING 1 - 11
SCO UNIX requires TCP/IP V1.2 or later to work with Brother print
servers. You must first configure the
/etc/hosts and
/etc/printcap files as described in step 2. Then run the
sysadmsh program as follows:
1 Select Printers.
2 Select Configure.
3 Select Add.
4 Enter the name of the print queue you entered in the
/etc/printcap file as the Printer name.
5 Enter anything as the Comment, and Class name.
6 For the Use printer interface select Existing.
7 Press the F3 key to get a list of available interfaces, and select
the desired one as the Name of interface using the cursor keys
(
Dumb is a good choice).
8 Select Direct as the Connection.
9 Enter the desired Device name ( /dev/lp generally works).
10 Select Hardwired as the Device.
11 Select No for the Require banner field.
Older SCO Unix Systems
The Brother NC-9100h Print/Fax servers support the FTP protocol.
Earlier SCO Unix systems are often configured to print using the FTP
protocol.
IBM AS/400
To use a Brother Print/Fax server with an IBM AS/400 running IBM's
TCP/IP gateways services for OS/400 (the OS/400 system must be
v3.1 or later)
Use the CFGTCP command at your OS/400 prompt to add the Print/
Fax server's TCP/IP address to the AS/400 host table.