Brother MFC 8840D - Manual (Page 22)

UNIX PRINTING 1 - 9
The procedure for pre-V4.0 systems is as follows.
1 Enter smit and select devices.
2 Select printer/plotter.
3 Select manage remote printer subsystem.
4 Select client services.
5 Select remote printer queues.
6 Select add a remote queue.
7 Enter the following remote queue settings:
■
Name of queue to add (user selectable).
■
Activate the queue (Yes).
■
Destination host (Print/Fax server name; must match name
in /etc/hosts file or use the Print/Fax server IP address)
■
Name of queue on remote printer (Print/Fax server binary
or text service name, eg. BINARY_P1 or TEXT_P1).
■
Name of device to add (user selectable; for example lp0 ).
Sun Solaris 2.x Configuration
Sun Solaris 2.x uses the lpsystem and lpadmin programs for remote
printer configuration:
lpsystem -t bsd prnservername
lpadmin -p queue -s prnservername!prnserverservice
accept queue
(not required on newer Solaris systems)
enable queue (not required on newer Solaris systems)
Where queue is the name of the local Print/Fax queue.
prnservername is the name of the Print/Fax server (must match
the entry in the /etc/hosts file or IP address).
prnserverservice is the print server BINARY_P1 or TEXT_P1
service.