Brother DCP-385C - Manual (Page 117)

Network Scanning (For models with built-in network support)
109
4
How to set a new default for Scan to E-mail
(E-mail Server, For MFC-6490CW and MFC-6890CDW)
4
You can set your own default settings.
Setting the new default
4
For MFC-6490CW
4
a Press the (Scan) key.
b Press a or b to choose Scan to E-mail.
Press OK.
c Press a or b to choose E-mail Server.
Press OK.
d Press and choose your new setting. Repeat this step for each setting you want to change.
e After changing the last setting, press a or b to choose Set New Default.
Press OK.
f Press 1 to choose Yes.
g Press Stop/Exit.
For MFC-6890CDW
4
a Press the (Scan) key.
b Press Scan to E-mail.
c Press E-mail server.
d Press Manual or Phone Book to enter the destination E-mail address.
e Press and choose your new setting. Repeat this step for each setting you want to change.
f
After changing the last setting, press d or c to choose Set New Default.
g
Press Yes.