Brother MFC-9440CN - Manual (Page 46)

30
5
How to fax
5
Entering fax mode
5
To enter fax mode press (Fax), and the
key will glow blue.
Sending a fax from the ADF
5
Using the ADF to send your faxes is the
easiest way. To cancel a fax in progress
press Stop/Exit.
a
Make sure you are in Fax mode .
b
Place your document face up in the
ADF.
c
Dial the fax number. (See How to
dial on page 52.)
d
Press Black Start or Color Start.
„ If you press Black Start, the
machine scans the pages into
memory and then sends the
document.
„ If you press Color Start, the
machine starts dialing and sends the
document in real time.
Note
If the Out of Memory message appears
while scanning a B&W document into
memory, press Stop/Exit to cancel or
Black Start to send the scanned pages.
The machine will scan and send your
document.
Sending a fax from the
scanner glass
5
You can use the scanner glass to fax the
pages of a book, or a single page at a time.
The documents can be up to Letter or A4
size. Press Stop/Exit to cancel a fax in
progress.
You can only send single page color faxes
from the scanner glass.
a
Make sure you are in Fax mode .
b
Place your document face down on the
scanner glass.
c
Dial the fax number. (See How to
dial on page 52.)
d
Press Black Start or Color Start.
„ If you press Black Start, the
machine starts scanning the first
page. Go to e.
„ If you press Color Start, the
machine starts sending. Go to g.
e
After the machine scans the page, the
LCD will prompt you to choose one of
the options below:
Next Page?
1.Yes 2.No(Send)
„ Press 1 to send another page.
Go to f.
„ Press 2 or Black Start to send the
document. Go to g.
f
Place the next page on the scanner
glass, press OK. Repeat e and f for
each additional page.
Set Next Page
Then Press OK
g
Your machine will automatically send
the fax.
Sending a fax
5