Memory board, So-dimm types – Brother MFC-9440CN User Manual
Page 120
104
e
For Windows
®
users:
Go to Start > Control Panel > Printers
and Faxes. Right-click on your printer
icon and choose Properties. Choose
the Accessories tab and click Auto
Detect. When the optional lower tray
and paper size have been detected click
Apply.
Note
The Auto Detect function is not available
under the following machine conditions:
• The machine power switch is off.
• The machine is in an error state.
• The machine is in a network shared
environment.
• The cable is not connected to the
machine correctly.
• If this situation occurs, you can
manually add the options you have
installed. In Available Options select
the option you have installed, click
Add, and then click Apply.
For Macintosh
®
users:
The printer driver is already configured for
use with the lower paper tray. No additional
steps are required.
Memory board
B
This machine has 64 MB of standard memory
and one slot for optional memory expansion.
You can expand the memory up to 576 MB by
installing dual in-line memory modules
(SO-DIMMs). When you add the optional
memory, it increases the performance for
both copy and print operations.
SO-DIMM types
B
Note
For more information, visit the Buffalo
Technology site at
.
In general, the SO-DIMM must have the
following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 1.25 in. (31.75 mm)
Dram Type: SDRAM 2 Bank
Buffalo SO-DIMM
Capacity
Buffalo part number
128 MB
VN133-D128/MF
VN133-D128/SD
256 MB
VN133-D256/MB
VN133-D256/SD
512 MB
VN133-D512/SCD
Tech Works SO-DIMM
Capacity
Buffalo part number
128 MB
12462-0001
256 MB
12485-0001
512 MB
12475-0001