Aastra Telecom 675xi Series User Manual
Page 36
New Features in Release 2.4
32
RN-001029-03, Release 2.4, Rev 00
IP Phone Release Notes 2.4
Configuring the Auto-Resync Functionality Using the Aastra Web UI
Use the following procedure to set the Auto-Resync parameters.
Aastra Web UI
1
Click on Advanced Settings->Configuration Server->Auto-Resync.
2
In the “Maximum Delay” field, enter maximum time, in minutes, the phone waits past the scheduled time before
starting a checksync. Valid values are 0 to 1439. Default is 15 minutes.
3
In the “Days” field, enter the amount of days that the phone waits between checksync operations. Valid values are
0 to 364. Default is 0 days.
Note: A value of 0 causes the phone to checksync every time the clock reads the proper time. A value of 1 forces
the phone to wait 24 hours prior to doing the first checksync.
4
Click
to save your setting.
Maximum Delay Parameter
Days Parameter
- 57i CT IP Phone (166 pages)
- 9112I (22 pages)
- AastraLink RP 500 (16 pages)
- SIP 480I CT (504 pages)
- 6739I (32 pages)
- 9110 (15 pages)
- AastraLink RP 6753i RP (2 pages)
- AASTRA 9133 I (60 pages)
- 5i Series (16 pages)
- 9316CW (2 pages)
- AastraLink RP 6757i CT RP (110 pages)
- SIP 57I CT (818 pages)
- 8009 (2 pages)
- IP Phone (210 pages)
- 9112i IP PHONE (47 pages)
- 9133i (USER GUIDE) (53 pages)
- 536M (2 pages)
- 480i (54 pages)
- 9143i (72 pages)
- M760E (60 pages)
- 57I (2 pages)
- 6755i (276 pages)
- MERIDIAN 9417CW (52 pages)
- Telephone 9110 (2 pages)
- 9116LP (28 pages)
- 53i IP Phone (102 pages)
- AastraLink RP 6751i RP (2 pages)
- 57i IP Phone (142 pages)
- 480i CT (Release 1.4.2) (18 pages)
- VentureIP (48 pages)
- M6320 (48 pages)
- AastraLinkRP IP-PBX (2 pages)
- Aastra 51i (9 pages)
- SISIP 57I (602 pages)
- 480i SIP (21 pages)
- 57I CT (40 pages)
- POWERTOUCH 390 (2 pages)
- 6751I (128 pages)
- 470 (27 pages)
- 53I (124 pages)
- 55i IP Phone (152 pages)
- Dialog 4000 (4 pages)
- IP TELEPHONES 51I (2 pages)
- 9417CW (52 pages)
- 6757I (276 pages)