Improved auto-resync functionality – Aastra Telecom 675xi Series User Manual
Page 35
New Features in Release 2.4
RN-001029-03, Release 2.4, Rev 00
31
SIP IP Phone Models 9143i, 9480i, 9480i CT, and 675xi Series Phones Release Note 2.4
Improved Auto-Resync Functionality
The existing auto-resync functionality on the IP Phones has been enhanced to reduce load on
configuration servers. The following parameters for auto-sync have been added to the
configuration file and the Aastra Web UI to support this feature:
•
The “auto resync max delay” parameter (in configuration file) and the “Maximum Delay”
parameter (in the Aastra Web UI) which allows you to configure the maximum value for the
random time the phone waits before beginning a download when the scheduled checksync
occurs. Default is 15 minutes.
•
The “auto resync days” parameter (in the configuration file) and the “Days” parameter (in the
Aastra Web UI) which allows you to specify the number of days the phone should wait after a
checksync before trying the download again. Default is 0 days.
Setting these parameters can greatly reduce the load placed on the configuration server when
downloading configurations.
Configuring the Auto-Resync Functionality Using the Configuration Files
Use the following parameters to enhance the auto-resync functionality.
Parameter–
auto resync max delay
Maximum Delay
(in Web UI)
Configuration Files
aastra.cfg,
Aastra Web UI
Advanced Settings->Configuration Server->
Auto-Resync
Description
Specifies the maximum time, in minutes, the phone waits past the
scheduled time before starting a checksync.
Format
Integer
Default Value
15
Range
0 to 1439
Example
auto resync max delay: 20
Parameter–
auto resync days
Days
(in Web UI)
Configuration Files
aastra.cfg,
Aastra Web UI
Advanced Settings->Configuration Server->
Auto-Resync
Description
Specifies the amount of days that the phone waits between checksync
operations.
Note: A value of 0 causes the phone to checksync every time the clock
reads the proper time. A value of 1 forces the phone to wait 24 hours prior
to doing the first checksync.
Format
Integer
Default Value
0
Range
0 to 364
Example
auto resync days: 1