Aiphone AC-10F User Manual

Page 9

English

Nederlands

Français

Deutsch

Español

· When the relay 1 output time is

set to latched output, the
auto-relock function is
disabled.

· When the auto-relock function

is turned on, the unlock
function of the request to
exit/entry button of relay 2 is
disabled.

· If the 0 key illumination function

is turned on while the timer is
on, only the 0 key illumination
will light up, even if the "key
illumination time setting" is set
to "Indicator is continually lit".

OFF

Operation

tone OFF

Operation

tone ON

Operation

tone OFF

Operation

tone ON

Relays 1 and 2

are both linked

Relays 1 and 2

are both linked

Only relay 1

is linked

Input the setting code.

Lockout

(Default: OFF)

Auto-relock

(Anti-tailgate)

(Default: OFF)

Timer-linked unlocking setting

(Default: relay 1, OFF)

Operation sound settings

(Default: ON)

0 key illumination ON

while timer is on

0 key illumination OFF

while timer is on

0 key illumination ON

while timer is on

0 key illumination OFF

while timer is on

Inputting the number of operations
(ex.

㧦10 times)

10 -99

Inputting length of time in "Lockout" mode
(Ex.: 10 seconds)
10 - 99

Input the master code twice.

(Default : )

Only relay 1

is linked

Only relay 2

is linked

Only relay 2

is linked

Beep

(orange)

Illumination

(green)

Blinking

Bleep, Bleep

Illumination Blinking

Bleep

Illumination Blinking

Bleep

Beep

Illumination Blinking

Bleep

Illumination Blinking

Bleep

Illumination Blinking

Beep

Illumination Blinking

Beep

- When the key is pressed, the green LED lights up, the buzzer beeps twice, and the system exits the setting mode.

(If the key is included in the user code and the master code, the system does not exit the setting mode.)

- You can continue the setting up operation by entering an arbitrary setting code.

Indicator
goes out

Blinking

Bleep,

Bleep