Aiphone PS-1820S - Manual

PS-1820 MANUAL E PM 0902 ® O a i p h o n e
DC POWER SUPPLY FOR INTERCOM
Models;
PS-1820
^ without AC plug
PS-1820UL
^ UL/CSA Listed
PS-1820S
5
Listed
This product is designed exclusively for use with Aiphone Intercom Systems.
INSTALLATION MANUAL
PRECAUTIONS
^ General prohibitions ^ Prohibitions to dismantie the unit o Generai precautions
A warning (Negligence could result In death or serious injury.)
• Do not connect the unit with any non-specified power source. Fire or electric shock could result. 0
• Do not connect any terminal on the unit to AC power lines. 0
• Keep AC cord away from being marred or crushed. Fire or electric shock could result.0
• Do not plug or unplug with wet hands. Electric shock could result.0
• Do not make the wires or DC output terminals shorted. Fire or unit trouble could result.0
• Do not dismantle or alter the unit. Fire or electric shock could result. 0
• Keep AC plug away from moisture or dust. Fire could result.0
A CAUTION
(Negligence could result in injury or damage to property.)
• Do not install or make any wire terminations while power supply is plugged in. It can cause
electrical shock or damage to the unit. 0
• Before plugging in the unit, make sure the wires are not crossed or shorted. It can cause fire
or electric shock. O
• Do not install the unit in any of the following locations, as it may cause the system to malfunction; 0
• High or extreme cold temperature areas: under direct sunlight, near equipment that varies in
temperature, in front of air-conditioner, inside a refrigerated area, etc.
• Places subject to moisture or humidity extremes, such as bathroom, cellar, greenhouse,etc.
• Places subject to environmental conditions, such as dust, oil, chemicals, salt, etc.
• Places subject to constant vibration or impact.
• Places subject to steam or smoke.(near heating equipment or cooking surfaces)
• Places subject to direct rain or outdoors.
Package contents
• Power supply (PS-1820,
PS-1820ULor PS-1820S)
' AC cord & plug (except PS-1820)
• Mounting bracket
• Packet of screws
• INSTALLATION MANUAL
Protection cover
Grounding terminal
DC output terminals
Type of plug varies by model
I AC cord requirements (for PS-1820)
• Rating: 125V, 2A (for use with 100-125V AC)
250V, 2A (for use with 200-240V AC)
• Cord length: min. 1.8m (6'), max. 2m (67”).
• Type: Must comply with requirements set out by the Safety Approval/Certification Organization in each country of use.
• AC cord inlet: Specified EN60320 or equivalent.
• Employ a plug in shape and ratings matched with AC outlet to be used.
Plug configuration Usage
AC cord
Nominal voltage
& current rating
UL LISTED
North American 120V, 60Hz,
2A min.
UL LISTED
North American 240V, 60Hz,
2A min.
Plug configuration Usage
AC cord
Nominal voltage
& current rating
Universal
European
230V, 50Hz,
2A min.
United Kingdom 230V, 50Hz,
2A min.
€7”
Australian 240V, 50Hz,
2A min.
1 -