Avaya TransTalk MDW 9040 - Manual (Page 75)

Using Handset Features Programming & Using the MDW 9040 Pocket Phone
5
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190 Issue 2, February 2001 67
Manually Selecting a Line or Programmed Button
When you are placing or answering a call, the MDW 9040 automatically selects the line for you. In some
situations, however, you may want to select a particular line (for example, to use an “800” line).
To select a particular line or programmable/intercom/drop button, use the following
procedure:
1 Press .
The icon displays steadily, and you are connected to an available line.
2 If the Selection arrow does not appear to the right of the row that includes the line
or button you want to use, press the Select-Row (
) button one or more times
until the arrow is to the right of that row. (See “ The Select-Row Button and the
Column Buttons ” earlier in this chapter for more information.)
3 Press the Softkey ( ) button below the line or button triangle that you want to
select.
You are connected to the line or you have access to the button you chose.
4 To deselect the line or button, press .
For information about assigning features to buttons, see Chapter 6 , “ MDW 9040 Pocket Phone Compatibility .”
5
1
A
6
2
B
7
3
C
8
4
D
Select-Row arrow
Column Selection pointer