Avaya TransTalk MDW 9040 - Manual (Page 46)

4
Registering the Pocket Phone to a Dual Radio Module Setting Up and Registering the
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190 38 Issue 2, February 2001
3 To exit any screen and move back to the previous screen, OR, if you do not want
to make any changes at this time, press the Softkey (
) below Back. To exit
Menu Mode, press the Menu button.
4 Once all handsets have been registered, proceed to the instructions in “ Mapping
to the Correct Communications System ” on page 40 .
Removing Registration Between a Handset and a Dual Radio Module
To unregister a handset and a radio module:
1 Follow Steps 1 through 5 of the registration procedures.
2 At the Registration screen (Zone 1 and Zone 2), press the Softkey ( ) below
UnReg.