Brother QL-1060N User Manual

Page 20

STEP2 Installing the Software

After restarting the computer,

connect the USB/LAN cable to the

machine.

As the caution label is covering the

USB port of the machine, remove it

and then connect the USB cable.

Connect the USB/LAN cable to the USB/LAN port of the Macintosh

Press the ON/OFF button ( ) on the machine to turn on the power.

When connecting the machine to the Macintosh

via a USB hub, it may not be

connected correctly. At that time, connect the machine directly to the USB port

of Macintosh

Double click the drive where Mac OS

X is installed, and click in

order of [Applications]-[Utilities]-[Printer Setup Utility].

For USB interface cable users

Click Add and choose USB at the top of the

screen (in Mac OS

X 10.3.9).

Choose QL-1060N from the list and click Add

again to add the printer to the Printer Setup

Utility.

For Mac OS

X 10.4.x, click Add and add the

printer with the BRPTUSB connection. (If you do

so, an error dialog appears when an printing error

occurs.) Set the appropriate printer name.

Now, go to step 10.

For Network interface cable users (Simple Network Configuration)

9-1 Click Add.

For Mac OS

X 10.3.9 users, make the

following selection.

For Mac OS

X 10.4.X users, go to the next

step.

Power cord

USB port

LAN port

Serial port