Brother QL-1060N User Manual

Page 17

STEP

For Wi

ndows

For M

acintosh

STEP

Installing the BRAdmin Light configuration utility for Windows

BRAdmin Light is a utility for the initial setup of Brother network connected devices. It can

also search for Brother products on your network, view the status and configure basic

network settings, such as IP address.

For more information on BRAdmin Light, visit us at http://solutions.brother.com.

Setting your IP address, Subnet Mask and Gateway using

BRAdmin Light

•

If you require more advanced printer management, use the latest Brother BRAdmin

Professional utility version that is available as a download from

http://solutions.brother.com.

•

If you are using Personal Firewall software (e.g. Windows Firewall), BRAdmin Light

may fail to detect the unconfigured device. In that case, disable your Personal

Firewall software, try BRAdmin Light again. Re-start your Personal Firewall

software after the address information is set.

Click Utility Installation.

This screen is the same screen as you

see when you insert the CD-ROM.

Click BRAdmin Light and follow the on-

screen instructions.

If the Windows Firewall is enabled on your PC,

the message “Do you wish to add this application

to the list of exceptions?” appears. Check your PC

environment and choose Yes or No.

Start BRAdmin Light. It will search for new

devices automatically.

If you have a DHCP/BOOTP/RARP server in your

network, you don’t have to do the following

operation, as the print server will automatically

obtain its IP address.