Brother QL-1060N - Manual (Page 12)

STEP1 Getting started 10
RS-232C cable and Network cable are not standard accessories.
Prepare the appropriate cable for your interface.
• USB cable
Use the enclosed interface cable.
• RS-232C cable
Do not use an interface cable that is longer than 6 feet (2.0 meters).
For details, see Appendix- Serial Cables of User's Guide.
• Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for
10BASE-T or 100BASE-TX Fast Ethernet Network.
Important
The enclosed interface cable should be used in order to ensure
compliance with the limits for EMC.
A shielded interface cable should be used in order to ensure compliance
with the limits for EMC.
Changes or modifications not expressly approved by Brother Industries,
Ltd. could void the user's authority to operate the equipment.
• Caution for LAN connection
Connect this product to a LAN connection that is not subjected to overvoltages.
• Caution for RS-232C connection
The RS-232C serial connector part of this equipment is not Limited Power Source.
6 Using Interface Cable