Brother TD-2120N - Manual (Page 56)

P-touch Template 2.0 Command Reference
- 50 -
7. Control Command Details
^SR Status request
ASCII: ^ S R
Decimal: 94 83 82
Hexadecimal: 5E 53 52
Parameters
None
Description
 Returns the printer status.
The printer status consists of 32 bytes.
Number Offset Size Name Value/Reference
1 0 1 Print head mark Fixed at 80h
2 1 1 Size Fixed at 20h
3 2 1 Brother code Fixed at “B” (42h)
4 3 1 Series code Fixed at “7” (35h)
5 4 1 Model code
Fixed at TD-2020: “3” (33h)
TD-2120N: “5” (35h)
TD-2130N: “6” (36h)
6 5 1 Country code Fixed at “0” (30h)
7 6 1 Battery level information Refer to table (5) below.
8 7 1 Reserved Fixed at 00h
9 8 1 Error information 1 Refer to table (1) below.
10 9 1 Error information 2 Refer to table (2) below.
11 10 1 Media width
12 11 1 Media type Refer table (3) below.
13 12 1 Number of colors Fixed at 00h
14 13 1 Media length (higher order bytes)
15 14 1 Media sensor value
16 15 1 Mode Fixed at 00h
17 16 1 Density Fixed at 00h
18 17 1 Media length (lower order bytes)
19 18 1 Status type Refer to table (4) below.
20 19 1 Phase type Fixed at 00h
21 20 1 Phase number (higher order bytes) Fixed at 00h
22 21 1 Phase number (lower order bytes) Fixed at 00h
23 22 1 Notification number Not used
24 23 1 Expansion area (number of bytes) Fixed at 00h
25 24 8 Reserved Fixed at 00h