Brother TD-2120N User Manual
Page 11
P-touch Template 2.0 Command Reference
- 5 -
2. P-touch Template Settings Tool User’s Guide
(1) Command mode setting
- P-touch Template mode
To use P-touch Template 2.0, select the P-touch Template mode.
- ESC/P mode
- Raster mode
(2) Template number setting
Specify the template number selected as the default when the printer is turned on.
However, if any template has been set to not be transferred to the printer, the number of that template
cannot be specified.
(3) Delimiter setting
A delimiter is the symbol used to indicate when to move to the next object in the data that is being sent.
Between 1 and 20 characters can be specified.
(4) Print start trigger setting
Select one of the following three options for the print start trigger.
- Command Character
(Printing starts when the command character specified in (5) is received.)
- Data Insertion into All the Objects
(Printing starts when the delimiter for the last object is received.)
- Received Data Size
(Printing starts when the number of characters specified in (6) is received. However, delimiters are not
counted in the number of characters.)
(5) Print start command text string setting
Specify 1 to 20 characters.
(6) Print start data amount setting
The amount of data that must be received before printing can begin can be set between 1 and 999.
(7) Character code set setting
Select one of the following three character code sets. For character code tables, refer to “
- Windows1252
- Windows1250
- Brother standard