Brother QL-720NW - Manual (Page 30)

Raster Command Reference
- 26 -
4. Printing Command Details
ESC @ Initialize
ASCII: ESC @
Hexadecimal: 1B 40
Description
 Initializes mode settings.
 Also used to cancel printing.
ESC i d Specify margin amount (feed amount)
ASCII: ESC i d {n1} {n2}
Hexadecimal: 1B 69 64 {n1} {n2}
Description
 Specifies the amount of the margins.
 Margin amount (dots)=n1+n2*256
 With die-cut labels, the margin amount at the ends of the printed area is 0.
(a) Continuous length tape
Print area
Margin amount
Tape Paper
Cut line
(b) Die-cut labels
Margin amount
(only
“0” is available)
Print area Label Paper
Cut line