Brother QL-720NW - Manual (Page 10)

Raster Command Reference
- 6 -
2. Print Data
(3) Raster data
Repeated for each page in the print job.
Sequence Command Name Description/Example
-
Raster graphics
transfer
Sends image data as commands.
- Zero raster graphics
Sends image data for 1 blank line as a compression command.
(Valid only when TIFF is selected as the compression mode)
5Ah (Fixed)
(4) Print commands
Specified at the end of the page.
Sequence Command Name Description/Example
- Print command
Specifies at the end of a page that is not the last page.
0Ch
-
Print command with
feeding Specifies at the end of the last page.
1Ah (Fixed)