Brother PT-9700PC - Manual (Page 60)

34
^OS Select object (object number)
[ASCII] ^ O S n1 n2
[Decimal] 94 79 83 nd1 nd2
[Hexadecimal] 5E 4F 53 nh1 nh2
[Parameters] 0≤n1≤5
0≤n2≤9
[Description]
・ Selects an object by its object number.
(n1*10)+n2:
Object number (1 to 50)
[Remarks]
・ The object number can be set between 1 and 50. This command becomes invalid if any
other value has been specified.
・ Use this command to insert data starting with an intermediary object.
[Example]
・ To select the 33rd object:
^ O S 3 3 (5Eh 4Fh 53h 33h 33h)
^ON Select object (object name)
[ASCII] ^ O N data 00
[Decimal] 94 79 78 datad 00
[Hexadecimal] 5E 4F 4E datah 00
[Parameters] None
[Description]
・ Selects an object by its object name.
data: Text string (object name)
[Remarks]
・ The maximum length of text that can be set is 20 characters. If text longer than this has
been specified, the command becomes invalid. In addition, the command becomes invalid
if no text has been specified.
・ “00h” should be added at the end of the text. This indicates the end of the text.
・ Use this command to insert data starting with an intermediary object.
[Example]
・ To select an object with the name “TEXT1”:
^ O N T E X T 1 00h
(5Eh 4Fh 4Eh 54h 45h 58h 54h 31h 00h)