Brother PT-9700PC - Manual (Page 5)

Using P-touch Template
1. Set up the printer.
With the P-touch Template Settings tool, specify the initial printer
settings according to the host system environment or the host
device that PT-9800PCN/PT-9700PC is connected to.
(Refer to “P-touch Template Settings tool” on page 7.)
The printer driver must first be installed via a USB connection.
2. Design the template.
With P-touch Editor, design the template to be
transferred.
(Refer to “P-touch Template limitations” on page 14.)
3. Transfer the template.
With P-touch Transfer Manager, transfer the
templates to the printer.
(Refer to the PT-9800PCN/PT-9700PC User’s Guide.)
4. Program using P-touch Template commands.
If any special commands are required to control the
printer, change the host program as described in
the P-touch Template Command Reference.
(Refer to the P-touch Template Command Reference.)