Brother PT-9700PC - Manual (Page 15)

“At Printing” setting
(To cancel the “At Printing” setting for a date/time in P-touch Editor, display the Date and
Time Properties dialog box for the Date and Time object, and then clear the “At Printing”
check box.)
・ Horizontal alignment settings (“Justify” or “Equal Length”) specified in P-touch Editor are
changed to the left alignment setting.
・ The setting for line spacing with a line feed specified with the P-touch can be set between
0 and 255 dots.
(A negative line spacing setting cannot be used in P-touch Editor. In addition, since there is
an upper limit (about 21 mm) for the line width with the machine, a line spacing setting
larger than this limit specified in P-touch Editor will not be applied on the machine.)