TOHO ELECTRONICS TTM-P9 - Manual (Page 16)

15
9.2 Rating and performance
Thermocouple Selection of thermocouples K, J, and R
When a wire is disconnected: Indicated as " "
Sampling period 0.5 seconds
Input
Indication accuracy Measured value ±(0.3% + 1 digit) or ±2°C, whichever is larger
(Ambient temperature: 23°C ±10°C
Relay output Contact type: 1a contact
Contact capacity: 250 VAC, 3 A (resistance load)
Minimum load: 5 VDC, 100 mA Output Rating
SSR output Output voltage: 0 VDC/12 VDC
Output voltage accuracy: ±1 V (Ambient temperature: 0 to 50°C)
Load resistance: 600
Ω
or more
Time signal/alarm output Contact type: 1a contact
Contact capacity: 250 VAC, 2.4 A (resistance load)
Minimum load: 5 VDC, 10 mA
Operation signal Contact type: 1a contact
Contact capacity: 250 VAC, 2.4 A (resistance load)
Minimum load: 5 VDC, 10 mA
DI (external input) Minimum input time: 500 ms
OFF voltage: Max. 6 VDC
ON current: Max. 6 mA
Allowable resistance between terminals:
ON: Max. 333
Ω
OFF: Min. 500 K
Ω
Timer accuracy Setting time ±(1.5% + 0.5 seconds)
PV display
TTM-P4: 4-digit 7-segment LED (green), character height 10 mm
TTM-P9: 4-digit 7-segment LED (green), character height 14 mm
SV display 4-digit 7-segment LED (red), character height 8 mm
Display
Lamp RUN, OUT, SET, and AL: Red LED
10. Maintenance and Inspection
10.1 Error indication:
: Memory error (Abnormality of EEPROM)
: A/D conversion error (Abnormality of A/D conversion)
: Automatic tuning error
TOHO ELECTRONICS INC.
Head Office: 1-13-21 Tanashioda Sagamihara Kanagawa 229-1125 Japan
Tel: +81-42-777-3311
Fax: +81-42-777-3751
Web. Site: http://www.toho-inc.com
E-Mail: [email protected]
47-5811