TOHO ELECTRONICS TTM000 - Manual (Page 6)

6
2.2 Setting a data length
2.3 Setting a stop bit length
2.4 Setting a parity
2.5 Setting whether to conduct a BCC check
While in the "Set a communications parameter" screen on the preceding page, operate the ▲ and ▼
keys to make the settings. The initial value is
.
＊＊＊＊
Stop bit 1
Stop bit 2
No parity
Odd parity
Even parity
Data length, 7 bits
Data length, 8 bits
BCC check disabled
BCC check enabled
2.6 Setting a communications speed
While in the "Set a communications speed" screen on the preceding page, operate the ▲ and ▼ keys
to make the settings. The initial value is
.
＊＊＊＊
1200 BPS
2400 BPS
4800 BPS
9600 BPS
19200 BPS
2.7 Setting an address
While in the "Set a communications address" screen on the preceding page, operate the ▲ and ▼
keys to make the settings. The initial value is .
Setting range: 1 to 99 stations (It cannot be set to a 0.)