TOHO ELECTRONICS TTM000 - Manual (Page 37)

37
9. Table of identifiers (codes)
For the setting range, options, initial values, and similar parameters, see the operation manual for
this system.
a) Identifier:
This code represents an item. Enter this code in the identifier field in the
message. The □ in the frame represents an SP (ASCII code: 20H).
b) Character: The character to be displayed on the system screen.
c) Name: Item name
d) R/W: This specifies which is possible: reading, writing, or both.
e) Description:
Note: The R/W to characters that do not meet the display conditions responds with "NAK2."
Example: If no EV2 option is selected, the R/W to the EV2 character becomes "NAK2."
Identifier Relative
address
Absolute
address
Character Name R/W Description
PV1 0000h 40001 Setting value (PV) R Use it as monitor for measurements (PV).
When overscale: HHHHH
When underscale: LLLLL
SV1 0002h 40003 Setting value (SV) R/W R/W the setting value (SV)
PR1 0004h 40005 Setting for 1st Priority display R/W RW the priority screen function setting 1
Example: INP (identifier)
PR2 0006h 40007 Setting for 2nd Priority display R/W RW the priority screen function setting 2
Example: □□INP (identifier)
PR3 0008h 40009 Setting for 3rd Priority display R/W RW the priority screen function setting 3
Example: □□INP (identifier)
PR4 000Ah 40011 Setting for 4th Priority display R/W RW the priority screen function setting 4
Example: □□INP (identifier)
PR5 000Ch 40013 Setting for 5th Priority display R/W RW the priority screen function setting 5
Example: □□INP (identifier)
PR6 000Eh 40015 Setting for 6th Priority display R/W RW the priority screen function setting 6
Example: □□INP (identifier)
PR7 0010h 40017 Setting for 7th Priority display R/W RW the priority screen function setting 7
Example: □□INP (identifier)
PR8 0012h 40019 Setting for 8th Priority display R/W RW the priority screen function setting 8
Example: □□INP (identifier)
PR9 0014h 40021 Setting for 9th Priority display R/W RW the priority screen function setting 9
Example: □□INP (identifier)
INP 0016h 40023 Input type setting R/W R/W the input type setting
PVG 0018h 40025 PV correction gain R/W R/W the PV corrected gain setting
PVS 001Ah 40027 Zero point setting for PV correction R/W R/W the PV corrected zero point setting
PDF 001Ch 40029 Filter input R/W R/W the input filter setting
□DP 001Eh 40031 Position for decimal point R/W R/W the decimal position setting
No decimal point: 00000
Decimal point: 00001
□FU 0020h 40033 FUNC key setting R/W R/W the function key function setting
LOC 0022h 40035 Key lock setting R/W R/W the key lock setting
SLH 0024h 40037 High limit setting in SV limiter R/W R/W the SV limiter upper limit setting
SLL 0026h 40039 Low limit setting in SV limiter R/W R/W the SV limiter lower limit setting