Sterlco 2016C (Former Compact Series) - Manual (Page 7)

COT-C Series Hot Oil Portable Temperature Control Units Page 7
1-3 Models Covered
This manual lists installation, operation, and maintenance
instructions for the 2016-C Series hot oil portable temperature
control unit.
Model numbers are listed on the serial tag. A model number
followed by
-Q indicates a specially constructed unit, and not all
information in this manual may apply. Make sure that you know
the model number, serial number, and operating voltage of your
unit if you contact STERLING, Inc.
1-4 Standard Features

Off-the-shelf microprocessor-based PID temperature
controller with Process and Set Point LED readouts

Non-fused lockable rotary disconnect

Dual stage immersion heater with IEC contactors

400ºF (205ºC) maximum operating temperature

Branch fusing

System status graphic display

Pressure switch for low pump pressure shut-down

NEMA 12 electrical enclosure

UL listed subpanel

To Process pressure gauge

Independent safety thermostat

Automatic venting sequence

Positive displacement pumps capable of reversing to
evacuate the process

Low level alarm for reservoir

Easily removable panels for quick access to internal
components

Audible alarm
1-5 Available Options

Drain valve