Warning – Sterlco 2016C (Former Compact Series) User Manual
Page 13
COT-C Series Hot Oil Portable Temperature Control Units
Page 13
Reservoir Tank
A reservoir tank with sight gauge is standard; usable capacity is
one (2) gallon (7.6 liters). The tank permits thermal expansion of
the heat transfer fluid, and provides make-up fluid.
!
WARNING
The reservoir tank may cause serious injury if it
ruptures from not being properly vented.
Make sure that the reservoir tank is always
properly vented to prevent tank rupture.
The reservoir tank drain is extended beyond the base of the unit for
ease of draining. Optional ball valves are available to further
simplify draining.
See also other documents in the category Sterlco Equipment:
- MDB Series Dryers (63 pages)
- SDA Series Medium Capacity Dehumidifying Dryer (52 pages)
- SDAP 90-225 CFM Series Drying and Conveying Systems (73 pages)
- SHA Series Hot Air Dryer (17 pages)
- SSL and SSIL Series Hopper Loaders (69 pages)
- SPL Series Powder Hopper Loader (43 pages)
- SVL Series Compressed Air Loaders (49 pages)
- SPV Remote Proportioning Devices (28 pages)
- SSC Conveying Systems (39 pages)
- SGBD Series Batch Gravimetric Blenders (101 pages)
- SGBD Series Batch Gravimetric Blenders (116 pages)
- SGBD Series Batch Gravimetric Blenders (110 pages)
- SDD Series (93 pages)
- SDD Series (96 pages)
- SF Series Volumetric Additive Feeder (55 pages)
- SF1000 Gravimetric Additive Feeder (37 pages)
- S-150 Digital Dosing Controller (79 pages)
- GH-F Series Gravimetric Additive Feeder (60 pages)
- GH Series Extrusion Control Weigh Hoppers (60 pages)
- A3 Blender Control and Data Acquisition Software (126 pages)
- SIT Inventory Monitor Units (18 pages)
- Micro Series Water Temperature Control Unit (45 pages)
- Micro Series Water Temperature Control Unit (46 pages)
- Royal Series Upright Temperature Control Unit (49 pages)
- SEU Series Economical Water TCU (42 pages)
- SEU Series Economical Water TCU (46 pages)
- Midsize (59 pages)
- Upright High Temperature Heat Transfer (49 pages)
- GP Series 5-15 HP Portable Chillers (93 pages)
- GP Series 20-60 HP Packaged Chillers (93 pages)
- SMC 2-3.5 Portable Chillers (46 pages)
- SBFC Series Blown Film Coolers (34 pages)
- M2B+ Controller (68 pages)
- 140 to 6,285 Gallon Pump Tanks (36 pages)
- 140 to 6,285 Gallon Pump Tanks (67 pages)
- SF Series Cooling Towers (25 pages)
- GC Series Central Chiller (79 pages)
- 30RA Outdoor Air Cooled Central Chillers 10-60 Tons (28 pages)
- S Series Central Chilling Stations (86 pages)
- S Series Central Chilling Stations (77 pages)
- 4300 Series Stainless Steel Condensate Pumps (10 pages)