Sterlco 2016C (Former Compact Series) - Manual (Page 3)

COT-C Series Hot Oil Portable Temperature Control Units Page 3
Safety Considerations
STERLING 2016-C Series portable hot oil temperature control
units are designed to provide safe and reliable operation when
installed and operated within design specifications, following
national and local safety codes.
To avoid possible personnel injury or equipment damage when
installing, operating, or maintaining this equipment, use good
judgment and follow these safe practices:
 Follow all SAFETY CODES.
 Wear SAFETY GLASSES and WORK GLOVES.
 Disconnect and/or lock out power before servicing or
maintaining the hot oil temperature control unit.
 Use care when LOADING, UNLOADING, RIGGING, or
MOVING this equipment.
 Operate this equipment within design specifications.
 OPEN, TAG, and LOCK ALL DISCONNECTS before
working on equipment. You should remove the fuses and carry
them with you.
 Make sure the hot oil temperature control unit and components
are properly GROUNDED before you switch on power.
 Do not jump or bypass any electrical safety control.
 Do not restore power until you remove all tools, test
equipment, etc., and the hot oil temperature control unit and
related equipment are fully reassembled.
 Only PROPERLY TRAINED personnel familiar with the
information in this manual should work on this equipment.