ROTRONIC HP23-AW-A - Manual (Page 9)

E-M-HP23-V2_13
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroPalm HP23-A / HP23-AW-A hand-held
indicator:
User Guide
Instruction Manual
Document Type
Page 9 of 37
Document title
© 2009-2012; Rotronic AG E-M-HP23-V2_13
HP23 Configurable Settings Factory default
Device name Instrument model
Fixed barometric pressure value K 1013.25 hPa (29.92 In Hg or 14.70 PSI)
Display refresh rate K 1 sec.
Battery type / Battery charge K Standard (non rechargeable)
Auto Power Off K OFF (disabled)
Date and time K Time zone dependent
Unit system (Metric or English) K Metric, except USA: English
Date and time format, date separator K European format (except North America)
Input configuration HygroClip 2 digital probe
Input name Probe 1 or Probe 2
Psychrometric calculation for the input K No calculation
Display backlight K On Key Press
Displayed parameters / display mode K %RH and temperature + date and time
Display resolution K 1 decimal
Trend indicator (display) K Enabled
Menu access from keypad Enabled
Delta Probe / User Defined Parameter K Disabled
Humidity / temperature calibration K Enabled
Humidity / temperature adjustment K Enabled
Manual data capture K Enabled
Data Logging K Disabled
Aw Mode (water activity measurement) K Disabled
Device write protection Disabled
Out-of-limit values alarm Disabled
Monitor sensor alarms Enabled (this function cannot be disabled)
Loss of communication with probe alarm Disabled
Simulator mode (fixed values) Disabled
For a detailed description of all HygroClip 2 probe (AirChip 3000) functions see document
E-T-AC3000-DF-V1
Instructions regarding the configuration of the HP23 and probes as well as access to the functions are
provided in the following manuals:
E-M-HW4v3-F2-012
E-M-HW4v3-F2-001
E-M-HW4v3-Main (§ 6.5)
E-M-HW4v3-DR-001
E-M-HW4v3-A2-001
E-M-AC3000-CP