Fig. 9: slave configuration, properties, Further address ranges [sk 5xxe] – profibus, Fig. 10: slave configuration, properties [sk 5xxe – NORD Drivesystems BU0940 User Manual
Page 19: Profibus, 2 step 7 hardware configurator
2 Step 7 hardware configurator
BU 0940 GB-3612
19
The dialogue window for the assignment of the input and the output addresses is opened by a double-
clicking on Slot 2 with the left mouse button (Figure below). For this, the addresses must be selected
after selection of the addresses for Slot 1. The addresses which are assigned must also be in the
peripheral image of OB1 in order to enable direct access to the peripherals.
Fig. 9: Slave configuration, properties
– Further address ranges [SK 5xxE] – PROFIBUS
Fig. 10: Slave configuration, properties [SK 5xxE]
– PROFIBUS
Pos : 21 /Anl eitungen/ SPS - Baus tei ne/Har dwar ekonfigurat or STEP 7/H ardwarekonfigur at or Step 7 f ür PROF INET IO @ 1\ mod_1338465547976_388. doc x @ 27106 @ 2 @ 1