Fig. 4: slave configuration, properties, Address ranges [sk 2xxe] – profibus, Fig. 5: slave configuration, properties [sk 2xxe – NORD Drivesystems BU0940 User Manual

Page 15: Profibus, 2 step 7 hardware configurator

Text mode
Original mode

2 Step 7 hardware configurator

BU 0940 GB-3612

The dialogue window for the assignment of the input and the output address is opened by a double-
clicking on Slot 2 with the left mouse button (Figure below). Here, it is advisable to assign the same
start addresses to the address ranges. It is important that the addresses which are assigned are in the
peripheral image of the OB1.

Fig. 4: Slave configuration, properties

– Address ranges [SK 2xxE] – PROFIBUS

Fig. 5: Slave configuration, properties [SK 2xxE]

– PROFIBUS

Pos : 20 /Anl eitungen/ SPS - Baus tei ne/Har dwar ekonfigurat or STEP 7/H ardwarekonfigur at or SK 5xxE [ PROF IBU S] @ 1\ mod_1338453255602_388. doc x @ 27056 @ 3 @ 1