NORD Drivesystems BU0940 - Manual (Page 16)

S7 standard modules – Supplementary manual options for NORD - Frequency Inverters
16 BU 0940 GB-3612
2.1.2 SK 5xxE hardware configurator
The procedure for the SK 5xxE is similar to that for the SK 2xxE
The GSD file "NORD_12.GSD" must be opened and the appropriate PPO type (e.g. PPO1 type)
selected and added to the network.
Fig. 6: Hardware configuration - Integration of NORD module [SK 5xxE] to PROFIBUS
After integration into the network (Figure above) a dialogue window opens in the hardware
configurator (Figure below). Entries must be made in this window. The selected GSD file is displayed
in the General tab in the "order number" field and therefore the correct selection can be checked.