Milestone Central 3.7 - Manual (Page 9)

Milestone XProtect Central 3.7; User’s Manual
Installing the Client
Upgrading from Previous Version
If upgrading from Milestone XProtect Central version 3.1 to version 3.6, you do not need to remove
your previous Milestone XProtect Central Client version; it will be overwritten when you install the
latest Client version.
Installation Procedure
1. Shut down any Milestone software running.
2. Insert the Milestone XProtect Central software DVD. After a short while, the Milestone
XProtect Central Client Setup Wizard will open.
Tip: If the Milestone XProtect Central Client Setup Wizard does not open automatically
upon inserting the DVD, run the CentralClientInstaller.exe file from the DVD. Alternatively,
if you are installing a version downloaded from the internet, run the .exe file from the
location you have saved it to.
3. On the wizard’s first page, click Next:
4. On the wizard’s second page, select the folder in which you want to install Milestone
XProtect Central. Also select whether just yourself or everyone using the computer should
be able to access the Milestone XProtect Central Client; if in doubt, select Everyone.
www.milestonesys.com Page 9 Installing the Client