Milestone Central 3.7 - Manual (Page 26)

Milestone XProtect Central 3.7; User’s Manual
By clicking the New Entry button you get access to
fields for adding alarm history information, changing
alarm state, changing owner, and changing priority
Saves changes you have made to the alarm.
The button is only available when you have made changes to the
alarm by clicking the New Entry button.
Closes the window.
Printing an Alarm Report
The Alarm Report window lets you print a report about an
alarm. To open the Alarm Report window, click the Print
button in the Alarm Detail window (see page 23).
A report will include the following:
• A single image recorded at the time the alarm was
caused (requires that your user rights allow you to
view images).
Tip: Provided you have created bookmarks (see
page 30), you can include more than one image in
the report. To include bookmarked images in the
report, select the Print bookmarks box in the lower
part of the window.
• The name of the device on which the alarm
occurred.
• The time at which the alarm occurred.
• The time at which the report was generated.
• The name of the user generating the report.
• The alarm history, including any comment entries you or others have made during the
handling of the alarm.
• An optional note.
www.milestonesys.com Page 26 Alarms